Audio Settings Page - Native Instruments Komplete Audio 6 Manual

If you cannot find the Control Panel, the software is most likely not installed. In this
case, please (re-)install the software as described in chapter
AUDIO 6.
On the left-hand side of the Control Panel, you find two tabs:
Click on the tabs to open the corresponding page of the Control Panel.
►
Proceed to chapters ↑5.1.1, Audio Settings Page
mation on the Control Panel's pages.
5.1.1

Audio Settings Page

The Control Panel's Audio Settings page.
In the Audio Settings page, you can configure the audio latency and sample rate; monitor the
device's status; enable clock syncing to external devices; and activate direct monitoring.
The Audio Settings page consists of four sections:
Sync Source, and Direct Monitoring. See the following subchapters for further information.
Advanced Configuration on Windows (Control Panel)
↑2, Installing KOMPLETE
Audio Settings
and ↑5.1.2, Diagnostics Page
Audio Processing, Device
KOMPLETE AUDIO 6 - Manual - 23
Advanced Configuration
and Diagnostics:
for more infor-
Monitor, Digital