Audio And Midi Settings - Native Instruments Groove production studio Manual

Screen Element
Pads
Sensitivity Slider
Velocity Scaling
Display
Brightness
Contrast Left & Right
Adjusting the Settings from the Hardware
You also have access to these settings from the MASCHINE hardware controller. To do this,
you first have to enter the MIDI mode by pressing
SHIFT + Button 4 to show the Settings Display mode. In this mode, the left display gives you
access to all of the settings described above, with the exception of the Velocity Scaling. The
Knobs 1-4 allow you to adjust the Brightness, Pad Sensitivity, Contrast Left and Contrast
Right, respectively.
When you're done, press
trol mode.
2.5

Audio and MIDI Settings

► To open the Audio and MIDI Settings dialog, select the Audio and MIDI Settings... entry
from the File menu.
Description
Use the Sensitivity Slider
touch. This sets the minimum threshold at which MASCHINE hardware
controller will register a "hit."
Velocity Scaling determines how your playing is translated into velocity val-
ues: starting from Soft 3 (a soft touch is enough to get a big velocity value)
through Linear to Hard 3 (you really have to hit the pad hard to get a big
velocity value).
The Brightness Slider allows you to adjust the brightness of both Left and
right displays of the MASCHINE hardware controller.
With these sliders you can adjust the contrast of the Left and right displays
separately.
SHIFT + CONTROL again to quit the MIDI mode and get back to Con-
to adjust how sensitive the pads respond to your
SHIFT + CONTROL. In MIDI mode, press
Basic Concepts
Audio and MIDI Settings
MASCHINE - Manual - 36