CareFusion LTV 1200 Service Manual page 344

Torque Values
The following Torque Values Table provides torque values used in the assembly of the LTV
1200, 1150, and 1100 ventilator.
Accumulator to Turbine Manifold Spacer
Analog Board mounting screws (2)
Back Panel side mounting screws (6)
Back Panel top mounting screws (3)
®
LTV 1200, 1150, and 1100 Battery Compartment screws (2)
Fan Assembly mounting screws (2)
Flow Valve Assembly mounting screws (2)
®
LTM/LTV Mounting Bracket (5)
®
LTM/LTV Mounting Block (3)
Main Board mounting screws (3)
Main Board mounting Hex –standoffs (2)
Manifold to back panel Spacer (4)
Motor Board mounting screws (4)
Oxygen Blender mounting screws (4)
Power Pigtail Interface bracket
Power Board mounting screws (except Solenoid Manifold
screws) (4)
Protective Boot, Upper – Leg mounting screws (2)
Protective Boot, Upper – Side mounting screws (2)
Protective Boot, Lower – Side mounting screws (4)
Rotary Switch Assy. Mounting nut (1)
Soft Side Panel (right or left) mounting screws (10)
Solenoid Manifold mounting screw (1) and nut (1)
Solenoid Mount Assembly (1) screw with (1) washer
Sounder bracket mounting screw (1)
Turbine Manifold mounting screws (4)
111
Inch ounces. A measurement of torque.
112
Newton meters. A measurement of torque equivalent to 0.007062 inch ounces.
p/n 18603-001, Rev. J
Assy./Part to be Torqued
®
LTV 1200, 1150, and 1100 Ventilator Service Manual
111 112
In-oz (Nm )
Torque Value
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
20 in-oz (0.14 Nm)
60 in-oz (0.42 Nm)
120 in-oz (0.84 Nm)
40 in-oz (0.28 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
20 in-oz (0.14 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
60 in-oz (0.42 Nm)
20 in-oz (0.14 Nm)
20 in-oz (0.14 Nm)
40 in-oz (0.28 Nm)
20 in-oz (0.14 Nm)
20 in-oz (0.14 Nm)
120 in-oz (0.84 Nm)
60 in-oz (0.42 Nm)
20 in-oz (0.14 Nm)
Page E-17
®