5)
Torque tighten the mounting screws to these specified values.
Torque tighten the screws in the legs of the boot to 60 in-oz (0.42 Nm)
Torque tighten the screws in the sides of the boot to 20 in-oz (0.14 Nm)
CAUTION
Damage to finish washers -Do not over tighten screws to avoid damage to the finish
washers.
p/n 18603-001, Rev. J
®
LTV
1200, 1150, and 1100 Ventilator Service Manual
Page 8-11