CareFusion LTV 1200 Service Manual page 235

NOTE
When the Motor PCBA is correctly seat on the power board, the pins on the power board
should visibly protrude through the top of the connector on the Motor PCBA.
18) Thread four 7/16" pan-head screws (P/N 10433) into the mounting holes in the Motor
PCBA and torque-tighten to 60 in-oz (0.42 Nm).
®
Page 8-114 LTV 1200, 1150, and 1100 Ventilator Service Manual p/n 18603-001, Rev. J