5) Replace the filter by sliding it back into the O
inlet port. Replace the O-Ring, making
2
sure it is completely tucked under the retaining lip on the inside of the O
inlet port.
2
6) Reconnect the high pressure O
line.
2
CAUTION
®
Wet or Damp Filters - Do not install a wet or damp filter into the LTV
Ventilator. This could
damage the ventilator.
®
p/n 18603-001, Rev. J
LTV
1200, 1150, and 1100 Ventilator Service Manual
Page 4-5