Solenoid Manifold Assembly; Solenoid Manifold Tube Routing Table - CareFusion LTV 1200 Service Manual

Solenoid Manifold Assembly

Parts required for replacement:

Solenoid Manifold Assembly P/N 18528-001

Solenoid Manifold Tube Routing Table

Solenoid
Manifold
Port Number
#1 Onto the high pressure port on the Valve Differential Transducer (PT7)
#2 Onto the Flow Differential Transducer (PT4)
#3 Onto the Airway Pressure Transducer (PT6)
#4 Onto the side panel low pressure Flow Transducer port
#5 From the Flow Valve (clear tubing)
#6 Onto side panel Exhalation Valve port
#7 Onto the Flow Differential Transducer
#8 Onto the side panel high pressure Flow Transducer port
#9 Onto Accumulator port A
NOTE
Tubing Configurations - When disconnecting tubes, note their positions and review the
internal flexible tube routing tables, instructions and diagrams beginning on page 8-33.
Page 8-120
Port Tubing Routed

through a tee & elbow subassembly

male Luer fitting on outside of panel

barbed fitting on outside of panel

through a tube & elbow subassembly

female Luer fitting on outside of panel

through a tube & tee subassembly
®
LTV 1200, 1150, and 1100 Ventilator Service Manual
Tools required:

Phillips screwdriver with torque meter

1/4" Nut Driver adapter for torque wrench

Grounded anti-static wrist strap

Torque screwdriver (120 in-oz/0.84 Nm)
Tubing
P/N
18624-001
18337-003
18337-006
18339-003
10455
18339-005
18625-001
and
18338-001
18339-005
18626-001
p/n 18603-001, Rev. J