Analog Input Thermistor Module Calibration - Advantech Data Acquisition Modules ADAM 4000 User Manual

8.3 Analog Input Thermistor module Calibration

Model: ADAM-4015T
If you select the range "Thermistor 3K 0~100C", please follow the
calibration steps as below.
1. Short the INIT* pin to GND and then power up ADAM-4015T.
Run ADAM-4000-5000 Utility and search for the module.
2. Click on "Lead Wire Effect Compensation"
Chapter
Chapter 8 Calibration 8-7
8