Advantech Data Acquisition Modules ADAM 4000 User Manual page 173

4015, 4015T, 4017+, 4018+, 4019+
$AA1Ci
Name Single Channel Offset Calibration command
Description The command calibrates a specified channel to correct for
offset errors.
Syntax $AA1Ci(cr)
$
AA
address of the analog input module which is to be
calibrated.
1
Ci
calibrate.
(cr)
Response !AA(cr)
?AA(cr)
There is no response if the module detects a syntax error or
communication error or if the specified address does not
exist.
!
received.
?
AA
address of the analog input module.
(cr)
Example command: $021C5(cr)
response: !02(cr)
The command calibrates channel 5 of the analog input
module at address 02 for correcting offset errors.
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Single Channel Offset Calibration command.
represents the specified input channel you want to
is the terminating character, carriage return (0Dh).
if the command was valid.
if an invalid operation was entered.
delimiter character indicates a valid command was
delimiter character indicates the command was invalid.
(range 00-FF) represents the 2-character hexadecimal
represents terminating character, carriage return (0Dh).
5-27
ADAM 4000 Series User's Manual
5
Chapter