Table of Contents
Advertisement
4050, 4051, 4052, 4053, 4055,
4056S, 4056SO, 4060, 4068, 4069
$AA5
Name
Reset Status command
Description
Requests the Reset Status of the addressed digital I/O
module to see whether it has been reset since the last Reset
Status command.
Syntax
$AA5(cr)
$
AA
address whose Reset Status is to be returned.
5
(cr)
Response
!AAS(cr)
?AA(cr)
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
?
command.
AA
address which is to be calibrated.
S
module. If S=1, the module has been reset since it was
issued last time. If S=0, the module has not been reset since
the last Reset Status command was not issued.
(cr)
7-16 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Reset Status command.
is the terminating character, carriage return (0Dh).
if the command was valid.
if an invalid command has been issued.
is a delimiter character which indicates a valid command.
is a delimiter character which indicates an invalid
(range 00-FF) represents the 2-character hexadecimal
represents the Status bit that is returned by the digital I/O
is the terminating character, carriage return (0Dh).
Digital I/O and Relay Output
Counter/Frequency Command Set
Advertisement
Table of Contents
