Advantech Data Acquisition Modules ADAM 4000 User Manual page 206

4011, 4011D, 4012
@AACE
Name Clear Event Counter command
Description The addressed module is instructed to reset its event
counter to zero.
Syntax @AACE(cr)
@
AA
address of an analog input module.
CE
(cr)
Response !AA(cr)
There is no response if the module detects a syntax error or
communication error or if the specified address does not
exist.
!
received.
AA
responding analog input module.
(cr)
Example command:
response:
The command instructs the module at address 09h to set its
event counter to zero. The module responds that its counter
has been reset.
5-60
ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Clear Event Counter command.
represents terminating character, carriage return (0Dh).
if the command was valid.
delimiter character indicates a valid command was
represents the 2-character hexadecimal address of the
represents terminating character, carriage return (0Dh).
@09CE(cr)
!09(cr)