Advantech Data Acquisition Modules ADAM 4000 User Manual page 302

4080
@AARP
@AARA
Name Read Alarm Limit Value of Counter 0 or 1 command
Description Read the alarm limit value of counter 0 or 1 of the specified
counter module at address AA.
Syntax @AARP(data)(cr)
@AARA(data)(cr)
@
AA
address of the module.
RP
command.
RA
command.
(cr)
Response !AA(data)(cr)
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
AA
address of the module.
(data)
hexadecimal digits.
(cr)
Example command:
response:
The command instructs the module at address 12h to return
the alarm limit value of counter 0. The module replies
that the alarm limit value of counter 0 is 0000FFFF.
7-67 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
represents the Read Alarm Limit Value for counter 0
represents the Read Alarm Limit Value for counter 1
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character which indicates a valid command.
(range 00-FF) represents the 2-character hexadecimal
is the alarm limit value which must consist of eight
is the terminating character, carriage return (0Dh).
@12RP(cr)
!120000FFFF(cr)
7
Chapter