Table of Contents
Advertisement
4080D
@AASA(data)
Name
Set Hi-alarm Count Value of Counter 0 command
Description
Set the high-alarm count value for counter 0 of the
specified counter module.
Syntax
@AASA(data)(cr)
@
AA
address of the module.
SA
command.
(data)
eight hexadecimal digits. This value should be higher than
the low-alarm count value.
(cr)
Response
!AA(cr)
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
AA
address of the module.
(cr)
Example
command: @12SAF0000000(cr)
response:
The
F0000000(hex) for channel 0 of the counter modules at
address 12. The addressed module replies that the
command has been received.
7-75 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Set High-alarm Count Value of Counter 0
is the high-alarm count value which must consist of
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character which indicates a valid command.
(range 00-FF) represents the 2-character hexadecimal
is the terminating character, carriage return (0Dh).
!12(cr)
command
sets
the
low-alarm
7
Chapter
count
number
Advertisement
Table of Contents
