Advantech Data Acquisition Modules ADAM 4000 User Manual page 301

4080
@AAPA(data)
@AASA(data)
Name Set Alarm Limit Value of Counter 0 or 1 command
Description Set the Alarm limit value of counter 0 or 1 of the specified
counter module at address AA.
Syntax @AAPA(data)(cr)
@AASA(data)(cr)
@
AA
address of the module.
PA
command.
SA
command.
(data)
hexadecimal digits.
(cr)
Response !AA(cr)
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
AA
address of the module.
(cr)
Example command:
response:
The command sets the alarm limit value 0000FFFF for
counter 0 of the counter module at address 12h.
module replies that the command has been received.
7-66 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
represents the Set Alarm Limit value for counter 0
represents the Set Alarm Limit Value for counter 1
is the alarm limit value which must consist of eight
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character which indicates a valid command.
(range 00-FF) represents the 2-character hexadecimal
is the terminating character, carriage return (0Dh).
@$12PA0000FFFF(cr)
!12(cr)
Digital I/O and Relay Output
Counter/Frequency Command Set
The