Advantech Data Acquisition Modules ADAM 4000 User Manual page 254

4050, 4051, 4052, 4053, 4055,
4056S, 4056SO, 4060, 4068, 4069
$AAM
Name Read Module Name command
Description The command requests the digital I/O module at address
AA to return its name
Syntax $AAM (cr)
$
AA
address that you will access to.
M
(cr)
Response !AA(Module Name)(cr)
There is no response if the module detects a syntax or
communication error, even or if the specified address does
not exist.
! is a delimiter character which indicates a valid command.
AA
address of the module.
(Module Name)
For example, 4052
(cr)
7-19 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Read Module Name command.
is the terminating character, carriage return (ODh).
(range 00-FF) represents the 2-character hexadecimal
is the name of the module at address AA.
is the terminating character, carriage return (ODh).
if the command is valid.
7
Chapter