Advantech Data Acquisition Modules ADAM 4000 User Manual page 315

4. Execute the Offset Calibration command. This is also done through
the ADAM utility software. (Please see "Offset Calibration" option
in the Calibration sub-menu of the ADAM utility software).
5. Execute the Span Calibration command. This can be done through
the ADAM utility software. (Please see "Span Calibration" option in
the Calibration sub-menu of the ADAM utility software).
Figure 8-2 Zero Calibration
Figure 8-3 Span Calibration
Chapter
Chapter 8 Calibration 8-3
8