Advantech Data Acquisition Modules ADAM 4000 User Manual page 201

4011, 4011D, 4012, 4016
@AADA
Name Disable Alarm command
Description Disables all alarm functions of the addressed analog input
module.
Syntax @AADA(cr)
@
AA
address of an analog input module.
DA
(cr)
Response !AA(cr)
There is no response if the module detects a syntax error or
communication error or if the specified address does not
exist.
!
received.
AA
responding analog input module.
(cr)
Example command:
response:
The analog input module at address 07h is instructed to
disable all alarm functions.
The module confirms it alarm functions have been disabled.
NOTICE: An analog input module requires a maximum of 2 seconds after
it received an Disable Alarm command to let the settings take
effect . During this interval, the module can not be addressed to
perform any other actions.
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Disable Alarm command.
represents terminating character, carriage return (0Dh).
if the command was valid.
delimiter character indicates a valid command was
represents the 2-character hexadecimal address of the
represents terminating character, carriage return (0Dh).
@07DA (cr)
!07(cr)
5-55
ADAM 4000 Series User's Manual
5
Chapter