Advantech Data Acquisition Modules ADAM 4000 User Manual page 185

4018M
@AAT
Name Read Memory Operation Mode command
Description Request the memory operation status of the analog input
data logger at address AA.
Syntax @AAT (cr)
@
AA
address of an analog input data logger.
T
(cr)
Response !AAO(cr)
!
received.
AA
address of an analog input module.
O
'1': enables the recording of data.
'0': disables the recording of data.
(cr)
Example command:
response:
The command requests the memory operation status of the
analog input data logger at address F3.
The response indicates that data recording is enabled.
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Read Memory Operation Mode command.
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character indicating a valid command was
(range 00-FF) represents the 2-character hexadecimal
represents the operation mode:
is the terminating character, carriage return (0Dh).
@F3T(cr)
!F31(cr)
5-39
ADAM 4000 Series User's Manual
5
Chapter