Advantech Data Acquisition Modules ADAM 4000 User Manual page 122

ADAM-4018+ Command Table (Continued)
Command Syntax
$AA1Ci
$AA7CiRrr
$AA8Ci
$AAXnnnn
$AAY
ADAM-4018+
Input range and external calibrating input source for each input type
Range Input Range
bcode(Hex)
06 +/-20 mA
07 4~20 mA
14 Type J
Thermocouple
15 Type K
Thermocouple
16 Type T
Thermocouple
17 Type E
Thermocouple
18 Type R
Thermocouple
19 Type S
Thermocouple
20 Type B
Thermocouple
Command Name
Offset Calibration
Input Range Setting
Read Input Range
Set Communication
WDT
Get Communication
WDT Setting
Max. Signal
+20.000
+20.000
Command Description
Offset error calibrate of assignment
channel, User have to input the external
standard source for calibrating process
Input range setting individually
Get the input range of the assignment
channel
Set communication WDT cycle time from
0000 ~ 9999 (unit: 0.1 second. if value is
0000, the communication WDT function
will be disable)
Read the cycle time setting of
communication WDT
Min Signal
-20.000
+4.000
Chapter 4 Command Set 4-19
4
Chapter
Page No.
5-28
5-29
5-30
5-31
5-32
Displayed
Resolution
1uA
1uA