Advantech Data Acquisition Modules ADAM 4000 User Manual page 186

4018M
@AAL
Name Event Record Count command
Description Request the number of event records stored in the analog
input data logger at address AA.
Syntax @AAL (cr)
@
AA
address of an analog input data logger.
L
(cr)
Response !AAHHHH(cr)
!
received.
AA
address of an analog input module.
HHHH
event records stored in the analog input data logger at
address AA.
(cr)
Example command:
response:
The command requests the number of event records stored
in the analog input data logger at address F3.
The module currently has 150 event records.
5-40
ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Event Record Count command.
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character indicating a valid command was
(range 00-FF) represents the 2-character hexadecimal
represents the 4-character hexadecimal number of
is the terminating character, carriage return (0Dh).
@F3L(cr)
!F30096(cr)