Advantech Data Acquisition Modules ADAM 4000 User Manual page 187

4018M
@AAN
Name Standard Record Count command
Description Request the number of standard records stored in the analog
input data logger at address AA.
Syntax @AAN (cr)
@
AA
address of an analog input data logger.
N
(cr)
Response !AAHHHH(cr)
!
received.
AA
address of an analog input module.
HHHH
data records stored in the analog input data logger at
address AA.
(cr)
Example command:
response:
The command requests the number of data records stored in
the analog input data logger at address A3.
The module currently has 800 data records.
is a delimiter character
(range 00-FF) represents the 2-character hexadecimal
is the Standard Record Count command.
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character indicating a valid command was
(range 00-FF) represents the 2-character hexadecimal
represents the 4-character hexadecimal number of
is the terminating character, carriage return (0Dh).
@A3N(cr)
!A30320(cr)
5-41
ADAM 4000 Series User's Manual
5
Chapter