Advantech Data Acquisition Modules ADAM 4000 User Manual page 308

4080D
@AACA
Name Clear Latch Alarm command
Description Both alarm states (High and Low) of the addressed counter
module are set to OFF, no alarm.
Syntax @AACA(cr)
@
AA
address of the module.
CA
(cr)
Response !AA(cr)
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
AA
module.
(cr)
Example command: @05CA(cr)
response:
The counter module at address 05h is instructed to set
both alarm states (High and Low) to OFF. The module
confirms that it has done so.
7-73 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Clear Latch Alarm command.
represents terminating character, carriage return (0Dh).
if the command was valid.
is a delimiter character which indicates a valid command.
represents the 2-character hexadecimal address of the
represents terminating character, carriage return (0Dh).
!05(cr)
7
Chapter