Advantech Data Acquisition Modules ADAM 4000 User Manual page 311

4080D
@AARP
Name Read Low-alarm Count Value of Counter 0 command
Description Read the low-alarm value of counter 0 of the specified
counter module.
Syntax @AARP(cr)
@
AA
address of the module.
RP
command.
(cr)
Response !AA(data)(cr)
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
!
AA
address of the module.
(data)
hexadecimal digits.
(cr)
Example command: @12RP(cr)
response:
The command instructs the module at address 12 to return
its low-alarm count value. The module replies that counter
0's low-alarm count value is 0000FFFF(hex).
7-76 ADAM 4000 Series User's Manual
is a delimiter character.
(range 00-FF) represents the 2-character hexadecimal
is the Read Low-alarm Count Value of Counter 0
is the terminating character, carriage return (0Dh).
if the command is valid.
is a delimiter character indicating a valid command
(range 00-FF) represents the 2-character hexadecimal
is the low-alarm count value which consists of eight
is the terminating character, carriage return (0Dh).
!120000FFFF(cr)
Digital I/O and Relay Output
Counter/Frequency Command Set