Table of Contents
Advertisement
Command Set
ADAM-4080 Command Table
Command Syntax
%AANNTTCCFF
$AA2
$AAF
$AAM
$AABS
$AAB
#AAN
(Continued on following page)
4-36 ADAM 4000 Series User's Manual
Command Name
Configuration
Configuration Status
Read Firmware
Version
Read Module Name
Set Input Signal
Mode
Read Input Signal
Mode
Read Counter or
Frequency Value
Command Description
Sets the address, input mode,
baud rate, checksum status and/or
frequency gate time for a specified
counter/ frequency module
Returns configuration parameters
from the specified
counter/frequency module
Return firmware version code from
the specified counter/frequency
module
Return the module name from the
specified counter/frequency
module
Sets the input signal mode of the
specified counter/frequency
module to either non-isolated or
photo-isolated input signals
Read the input signal mode of the
specified counter/frequency
module.
Returns the value of counter 0 or
counter 1 from a specified counter/
frequency module in hex format
Page
No.
7-28
7-30
7-31
7-32
7-33
7-34
7-35
Advertisement
Table of Contents
