Advantech Data Acquisition Modules ADAM 4000 User Manual page 123

Command Set
ADAM-4018M Command Table
Command Syntax
%AANNTTCCFF
$AA2
$AAF
$AAM
#AAN
$AA5VV
$AA6
$AA0
$AA1
$AA3
$AA9SNNNN
@AACCCSDMTTTT
@AAD
@AASO
4-20 ADAM 4000 Series User's Manual
Command Name
Configuration
Configuration
Status
Read Version
Read Module
Name
Read Analog Input
from Channel N
Enable/disable
Channels for
Multiplexing
Read Channel
Status
Span Calibration
Offset Calibration
CJC Status
CJC Offset
Calibration
Set Memory
Configuration
Read Memory
Configuration
Set Memory
Operation Mode
Command Description
Set the address, input range, baud
rate, data format, checksum status
and/or integration time for the
specified analog input module
Return the configuration
parameters for the specified
analog input module
Return the firmware version code
from the specified analog input
module
Return the module name from the
specified analog input module
Return the input value from
channels number N of the
specified analog input module
Enables/disables multiplexing
simultaneously for seperate
channels of the specified input
module
Ask the specified input module to
return the status of all eight
channels
Calibrate the analog input module
to correct for gain errors
Calibrate the analog input module
to correct for offset errors
Returns the value of the CJC
sensor for a specified analog input
module
Calibrates the CJC sensor for
offset errors
Set the channel storage status,
standalone mode, data logger
mode, storage type and sampling
interval for the specified analog
input data logger.
Return the configuration
parameters for the specified
analog input data logger.
Start/stop the recording function of
the memory module.
Page
No.
5-4
5-10
5-12
5-13
5-16
5-17
5-18
5-19
5-20
5-25
5-26
5-37
5-39
5-40