Advantech Data Acquisition Modules ADAM 4000 User Manual page 235

4024
ADAM-4024 Command Review: (Continued)
Command Set Function
$AA8Cn Read Back CHn Output Range
$AAACnZ Enable/Disable (Z=1/0) CHn EMS Flag
$AABCn Read CHn EMS Flag
$AADCn Read Back CHn StartUp Data
$AAECn Read Back CHn Emergency Stop Data
$AAF Read Firmware Version
$AAG Reset Current Trim Data Variable To 0
$AAH Read Current Trim Data Variable
$AAI Read IDI
$AAM Read Module Name
$AANCn Read Back CHn 4mA Calibration
Parameter
$AAOCn Read Back CHn 20mA Calibration
Parameter
$AAPCn Clear CHn 4mA Calibration Parameter /
EEPROM
$AAQCn Clear CHn 20mA Calibration Parameter /
EEPROM
$AAXnnnn This command set the communication
watchdog timer (WDT) cycle time.
AA: (range 00-FF) 2-character
hexadecimal address of the analog input
module which is to be read.
X: the setting WDT command.
Nnnn:
value of communication cycle you want to
set. (Unit: 0.1 second)
$AAY Read Communication Watchdog Timer
Cycle Setting.
AA: (range 00-FF) 2-character
hexadecimal address of the analog input
module which is to be read.
Y: the reading WDT cycle command.
6-21 ADAM 4000 Series User's Manual
(range 0000~9999) the specified
Response Example
!AACnxx $027C2
!AA $02AC21
$02AC20
!AACn1 $02BC2
!AACn0
!AA(data) $02DC2
!AA(data) $02EC2
!AAAx.xx $02F
!AA $02G
!AAxx (xx=m) $02H
!AAx $02I
!AA4024 $02M
!AAxx $02NC2
!AAxx $02OC2
!AA $02PC2
!AA $02QC2
!AA $02X1234
!AA $02Y
6
Chapter