Functions Added To V850E/Ia2 - NEC PD703114 User Manual

9.1.3 Functions added to V850E/IA2

(1) Addition of BFCMn4 and CM0n4 registers, and BFCMn5 and CM0n5 registers
When the TM0CEn bit of the TMC0n register is 1 (counting enabled), transferring data from the BFCMn4 or
BFCMn5 register to the CM0n4 or CM0n5 register is enabled or disabled by the BFTEN bit of the TMC0n
register (n = 0, 1).
(2) Compare-match interrupt output function of CM010 to CM012, CM0n4, and CM0n5 registers
(INTCM010 to INTCM012, INTCM0n4, INTCM0n5)
The features of the compare-match interrupt output function (INTCM010 to INTCM012, INTCM0n4,
INTCM0n5) of the CM010 to CM012, CM0n4, and CM0n5 registers are as follows (n = 0, 1):
(a) This interrupt signal is not affected by the STINTn bit of the TMC0n register that specifies occurrence of
an interrupt when timer TM0n is started.
(b) The compare-match interrupt output function of the CM010 to CM012, CM0n4, and CM0n5 registers
does not have an interrupt culling function. Therefore, it is not affected by the CUL02 to CUL00 bits of
the TMC0n register.
The sources of this interrupt signal are shown below.
Table 9-1. Sources of INTCM010 to INTCM012, INTCM0n4, and INTCM0n5
Unit Interrupt Name
TM00 INTCM000 to INTCM002
INTCM004, INTCM005
TM01 INTCM010 to INTCM012
INTCM014, INTCM015
Note The V850E/IA2 does not include INTCM000 to INTCM002.
Remarks 1. : Function provided
×:
Function not provided
2. n = 0, 1
CHAPTER 9 TIMER/COUNTER FUNCTION
A/D Trigger Function
×
Note
×
User's Manual U15195EJ5V0UD
Interrupt Function DMA Trigger Source
× ×
×
197