NEC PD703114 User Manual page 345

(12) Timer 2 output delay register 0 (ODELE0)
The ODELE0 register sets the output delay operation synchronized with the clock to the TO2n pin's output
delay circuit (n = 1 to 4).
This register can be read/written in 16-bit units.
When the higher 8 bits of the ODELE0 register are used as the ODELE0H register, and the lower 8 bits are
used as the ODELE0L register, they can be read/written in 8-bit or 1-bit units.
15 14 13 12
ODELE0 0 ODLE42 ODLE41 ODLE40
Bit position Bit name
14 to 12, 10 to 8, ODLEn2,
6 to 4, 2 to 0 ODLEn1,
ODLEn0
Remark n = 1 to 4
CHAPTER 9 TIMER/COUNTER FUNCTION
11 10 9 8 7 6
0 ODLE32 ODLE31 ODLE30 0 ODLE22
Specifies output delay operation.
ODLEn2 ODLEn1
0 0
0 0
0 1
0 1
1 0
1 0
1 1
1 1
Remark The ODLEn2, ODLEn1, and ODLEn0 bits are used for EMI
countermeasures.
User's Manual U15195EJ5V0UD
5 4 3 2 1 0
ODLE21 ODLE20 0 ODLE12 ODLE11 ODLE10
Function
ODLEn0 Set output delay operation
0 Output delay operation not performed.
1 Sets output delay of 1 system clock.
0 Sets output delay of 2 system clocks.
1 Sets output delay of 3 system clocks.
0 Sets output delay of 4 system clocks.
1 Sets output delay of 5 system clocks.
0 Sets output delay of 6 system clocks.
1 Sets output delay of 7 system clocks.
Address After reset
FFFFF668H 0000H
345