NEC PD703114 User Manual page 619

15.7.6 Self-programming function number
To identify a self-programming function, the following numbers are assigned to the respective functions. These
function numbers are used as parameters when the device internal processing is called.
CHAPTER 15 FLASH MEMORY (
Table 15-9. Self-Programming Function Number
Function No.
0 Acquiring flash information
1 Erasing area
2 to 4 RFU
5 Area write back
6 to 8 RFU
9 Erase byte verify
10 Erase verify
11 to 15 RFU
16 Continuous write in word units
17 to 19 RFU
20 Pre-write
21 Internal verify
Other Prohibited
Remark RFU: Reserved for Future Use
User's Manual U15195EJ5V0UD
µ
PD70F3114)
Function Name
619