NEC PD703114 User Manual page 633

15.7.18 Self-programming library
V850 Series Flash Memory Self-Programming User's Manual is available for reference when executing self-
programming.
In this manual, the library uses the self-programming interface of the V850 Series and can be used in C as a utility
and as part of the application program. To use the library, thoroughly evaluate it on the application system.
(1) Functional outline
Figure 15-21 outlines the function of the self-programming library. In this figure, a rewriting module is located
in area 0 and the data in area 1 is rewritten or erased.
The rewriting module is a user program to rewrite the flash memory. The other areas can be also rewritten by
using the flash functions included in this self-programming library. The flash functions expand the entry
program in the external memory or internal RAM and call the device internal processing.
When using the self-programming library, make sure that the hardware conditions, such as the write voltage,
and the software conditions, such as interrupts, are satisfied.
Figure 15-21. Functional Outline of Self-Programming Library
Flash memory
Area 1
Rewriting module
Area 0
CHAPTER 15 FLASH MEMORY (
Erase/write
Rewriting module
Flash rewriting program
Self-programming
User's Manual U15195EJ5V0UD
µ
PD70F3114)
Flash function
Flash environment
library
633