Table of Contents
Advertisement
Batch File Operations
You can process all files or registers in batch.
Saving Files in Batch
You can save the data in registers to the local drive or
removable drive in batch.
1
Open the File >All, External File >All menu (7161).
2
Select the target device for operation (see page 355).
In the device selection area on the left, select
[Register].
In the device selection area on the right, select [Local
Drive] or [Removable Drive], then specify a directory.
3
In the <Category> group, select the category of the
target registers to save.
For categories you do not want to save, press the
corresponding button, turning it off.
To select all categories, press [All Select], turning it
on.
For details about target data for operations, see
"Supported files" (page 354).
4
Press [t Save].
5
Check the message, then press [Yes].
Loading Files in Batch
You can load files from the local drive or removable drive
in batch.
1
Open the File >All, External File >All menu (7161).
2
Select the target device for operation (see page 355).
In the device selection area on the left, select
[Register].
In the device selection area on the right, select [Local
Drive] or [Removable Drive], then specify a directory.
3
In the <Category> group, select the category of the
target files to load.
For categories you do not want to load, press the
corresponding button, turning it off.
To select all categories, press [All Select], turning it
on.
For details about target data for operations, see
"Supported files" (page 354).
4
Press [T Load].
5
Check the message, then press [Yes].
To clear region data before loading
Before pressing [T Load], press [CLR Before Load],
turning it on.
The following data can be cleared before loading.
Effect, Snapshot, Wipe Snapshot, DME Wipe Snapshot,
Key Snapshot, Shotbox, and Macro
Copying Files in Batch
You can copy files between the local drive and removable
drive in batch.
1
Open the File >All, External File >All menu (7161).
2
Select the target device for operation (see page 355).
In the device selection area on the left, select the copy
source ([Local Drive] or [Removable Drive]), then
specify a directory.
In the device selection area on the right, select the copy
destination ([Local Drive] or [Removable Drive]),
then specify a directory.
3
In the <Category> group, select the category of the
target files to copy.
For categories you do not want to copy, press the
corresponding button, turning it off.
To select all categories, press [All Select], turning it
on.
For details about target data for operations, see
"Supported files" (page 354).
4
Press [t Copy].
The selected files are copied.
If there is already data present in the destination
location, a confirmation message appears. Select [Yes]
to overwrite the data.
358
Advertisement
Table of Contents
