File Batch Operations
You can batch process all files or registers. Carry out these operations using the
File>All, External File>All menu.
Displaying the Batch Operation Menu
1
2
Batch Saving Files
To save the data of all registers to hard disk or memory card, use the following
procedure.
Notes
• Files saved on the hard disk may be lost if the hard disk fails. Always keep
• Format a memory card (see page 295) before using it for the first time.
1
2
446
File Batch Operations
Press the top menu selection button [FILE].
Select VF6 'All, External File' and HF1 'All.'
The All menu appears.
separate backup copies of important files on a memory card.
In the device selection area of the All menu, select the destination for
saving the files ([HDD] or [Memory Card] and directory). (See page 436.)
If there are registers you do not want to save, in the <Category> group,
exclude them from the operation. To select all registers, press [All Select].
For details of the data to which operations apply, see "Files" in Chapter
1 (Volume 1).
Note
The frame memory is not selected when you press [All Select]. To apply
the setting to frame memory, press [Frame Memory], turning it on. When
frame memory is selected, it is not possible to apply settings to the
<Category> group data.