Key Snapshot Operations - Sony MVS-6520 User Manual

1 "To apply color to a border" (p.
For details,
4
Press [Border Soft].
5
Set the following parameters.
No. Parameter
1 Inner Soft
2 Bound Soft
Resizer Effect Settings
For example, to make the effect settings for key 1 of the
M/E-1 bank, use the following procedure.
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
In the <Resizer Effect> group, press [Enhanced
Effect].
The Enhanced Effect (1115.4) menu appears.
Applying a mosaic
1
In the Enhanced Effect menu (1115.4), press [Mosaic],
turning it on.
2
Set the parameters.
These settings are the same as in
(1 p. 186).
Notes
If mosaic is enabled, crop is disabled.
Defocusing
1
In the Enhanced Effect menu (1115.4), press
[Defocus], turning it on.
98
Key Snapshots
97).
Adjustment
Border inner softness
Border boundary softness
"Mosaic Settings"
2
In the <Defocus Mode> group, select the signal to
which to apply the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
3
Set the parameters.
This procedure is the same as in
(1 p. 184).
Notes
If defocus is enabled and you select [Video/Key] in the
<Defocus Mode> group, then crop is disabled.
Key Snapshots
Key settings other than the key on/off status and the key
priority can all be instantaneously saved in a dedicated
register, for recall when required. A key snapshot
comprises three values: a cross-point button number, key
memory full mode, and independent key transition, and
can be called in any combination.
There are four key snapshot registers for each keyer.

Key Snapshot Operations

Key snapshot operations are carried out in the transition
control block or the Flexi Pad.
Key delegation buttons
Key snapshot buttons
Transition control block
(ICP-6520/6530 M/E banks, ICP-3000/3016 M/E and
PGM/PST banks)
"Defocus Settings"