Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
54 Upgrade a Ring to R5.1.0 software
54.1 Purpose
This chapter provides the procedure to activate R5.1.0 software on Ring nodes when
ERPS is in use. This procedure must be performed when upgrading from a release
earlier than R5.0.0 to ensure that the Ring status is maintained during the software
upgrade.
54.2 General
The first node on which the software is activated must be a neighbor to the RPL
owner. This procedure will use Node B as an example, as shown in
Figure 388
Ring example for upgrade
Upgrade a Ring to R5.1.0 software
Figure
388.
579