Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Upgrade and downgrade radio profile
74.4 Procedures
This section provides the following procedures:
To upgrade a radio profile
Caution: This is an Out-of-Service procedure. Schedule appropriate maintenance window
per local practices and procedures.
1. Verify that the system license key supports the new radio profile. For information
2. From the radio direction Reference Channel Spacing drop-down menu, select
3. From the radio direction Modulation drop-down menu, select the new
4. Click on the Apply button.
5. Verify the Tx power provisioning and adjust, as described in the site
6. Verify that the radio direction is alarm free.
7. Verify that the radio direction is error free and operating as expected.
To downgrade a radio profile
Caution: This is an Out-of-Service procedure. Schedule appropriate maintenance window
per local practices and procedures.
1. Open the radio channel view. Take a screen capture to save all radio channel
2. From the radio direction Reference Channel Spacing drop-down menu, select
1058
•
To upgrade a radio profile
•
To downgrade a radio profile
about how to display and upgrade the system license key, see
software
license.
new channel bandwidth.
modulation value.
documentation.
Note: To complete an upgrade of a radio profile, both ends of the radio hop must
be upgraded.
provisioning information.
the new channel bandwidth.
WebEML User Manual
Administer
Advertisement
Table of Contents
