Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Configure AUX cross connections (ETSI market
only)
To create an AUX Cross connection
1. Select in the New Cross-Connection area the first Termination Point (this can
2. Select the second Termination Point as shown in the example in
Note: The cross-connections are bi-directional.
Figure 233
Auxiliary Cross Connections menu
3. Click on Add. The new cross-connection will appear in the list (upper part of the
Note: The Apply button has not been implemented.
404
•
To create an AUX Cross connection
•
To delete an AUX Cross connection
be a local service channel or a service channel in a radio link). Note: the local
service channel must be first enabled in the AUX unit setting menu.
screen as shown in
Figure
234).
WebEML User Manual
Figure
233.
Advertisement
Table of Contents
