Figure 399 Node J To Node K: Pass-Through Cross-Connection On Node A - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 399 Node J to Node K: pass-through cross-connection on Node A
2. Configure a pass-through cross-connection on Node B, see
592
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: Node D Unicast MAC address
e. Enter the Ring Source MAC address: Node A Unicast MAC address
WebEML User Manual
Figure 400.