Figure 209 Radio To Ring Cross Connection - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
1. Verify port segregation provisioning. Port segregation should be provisioned
2. Select Radio port and drag and draw line to RING port.
Figure 209 Radio to Ring Cross Connection
3. On the RADIO-RING pop-up, select ERP Instance to be cross connected.
4. On the RADIO-RING pop-up, select VLAN ID number from the Available VLANs
between parallel radio paths at both ends when they exist on the NE. When
making a cross connection to one of parallel radio ports, port segregation should
also be provisioned between the radio port and all other parallel radio ports.
Additionally, port segregation should be provisioned between the radio ports and
other Ethernet and/or radio ports where connectivity is not desirable. See
Provision port segregation/connectivity
segregation.
RADIO-RING pop-up displays. See
field.
Provision cross connections
for detailed steps to view/provision port
Figure 209.
377