Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
Figure 621
Measurements tab for MPT-HLC
72. Enter the measured Tx and Rx Branching Loss values. The Diversity Rx
73. Click Apply.
To administer the MPT-HLS transceiver
1. Select an action.
826
Branching Loss can also be configured if the diversity combiner is in use.
If measured values are not available, see the 9500 MPR-A MPT-HL Engineering
Specifications for information.
a. To
Provision the MPT-HLS co-channel XPIC
b. To
Provision the MPT-HLS 1+1 XPIC
c. To
Provision the MPT-HLS radio protection
d. To
Provision the MPT-HLS radio for fixed
e. To
Provision the MPT-HLS radio for adaptive
f. To
Provision the MPT-HLS 1+1 spare radio
WebEML User Manual
configuration, go to step 2.
configuration, go to step 13.
type, go to step 24.
modulation, go to step 29.
modulation, go to step 32.
channel, go to step 35.
Advertisement
Table of Contents
