Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
47. Provision Spare MPT-HLC radio channel ATPC:
48. Provision the MPT-HLC radio protection scheme
Note: Revertive restoration criteria is the default value.
Figure 618
MPT-HLC transceiver protection criteria provisioning
820
i. Select the ATPC Enabled check box.
ii. Enter the Min-Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold (-90.0 / -20.0 dBm).
iv. Click Apply.
Open the appropriate radio main view depending on your radio configuration
and select Protection Schemes tab; see
WebEML User Manual
Figure
618.