Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
61 Use the Provisioning Tool
61.1 Purpose
This chapter provides procedures for provisioning 9500 MPR equipment using the
Provisioning Tool.
Some equipment and parameters must be provisioned using WebEML. See the
Product Information Guide for more information.
61.2 General
The Provisioning can be performed by using the Provisioning Tool or WebEML. The
Provisioning Tool provides an option to create and modify a provisioning file and
apply it to an NE.
The Provisioning Tool allows you to prepare the provisioning in the back office,
minimizing time on field and potential for error.
Note: Graphics in this chapter are examples.
61.2.1 Provisioning tool screens
The provisioning tool presents screens that reflect the provisioning selections
previously made. Different screens will appear as you proceed depending on the
selections made.
The MSS Subrack panel appears on every screen, showing the units configured for
each slot and the MPTs configured, if any. The slot currently being configured is
shaded blue. The screens are presented in slot order: the Core-E configuration
screen is always first, followed by the configuration screen for the unit configured in
slot 3.
Eight slots will appear in the tool. If you are provisioning an MSS-4, do not provision
anything in slots 5 to 8.
Use the Provisioning Tool
889
Advertisement
Table of Contents
