Release 7.0.0 3DB 19286 ACAA Issue 01
Configure EFM OAM
Figure 109
ETH OAM window
2. Choose the Ethernet interface from the list.
3. Choose the Active or Passive radio button in the Link OAM Mode field.
4. In the Link OAM Parameter pane, choose the Enable radio button in the Link
5. Click on the Apply button. The link is enabled.
To disable an OAM link
1. In the ETH OAM Configuration window, select the interface from the list.
2. In the Link OAM Parameter pane, choose the Disable radio button in the Link
214
The ETH OAM window opens. See
OAM field.
OAM field.
WebEML User Manual
Figure
109.