Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
29 Administer NE list
29.1 Purpose
This chapter provides procedures to create an NE list, add NEs to the NE list, and
how to log in to an NE using the NE list.
29.2 Prerequisite
The Username and current Password must be known before log in can be
accomplished. The 9500 MPR craft terminal (CT) software must be installed on the
PC. The user must know the IP address of the NE to log in to the system or be locally
connected.
29.3 General
The 9500 MPR provides support for the craft terminal (CT) or WebEML (JUSM/CT)
function, allowing NE management through a web-enabled PC.
The NE is accessed using the Network Element Overview (NEtO) application.
29.4 Procedures
This section provides the following procedures:
To create an NE list
•
To create an NE list
•
To add an NE to a List by first logging in to the NE
•
To add an NE to a list by entering NE IP address
•
To open an NE from a saved list of NEs
•
To open an NE from the current list of NEs
Administer NE list
219