Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Note: For a detailed procedure to provision VLAN Configuration, see
configuration, step 5.
7. From the LAG Information pane Hash drop-down menu, select hashing level:
8. From the LAG Information pane, select Enabled check box (checked).
9. Click Apply.
10. Verify L2 Ethernet LAG port provisioning.
To create an L1/L2 Radio or L2 Ethernet LAG port
Caution: Adding the first radio port, which is carrying traffic, to a L1 Radio LAG port has an
impact to traffic.
Note: When adding the first radio (Lowest Index Port) to L1 Radio LAG, the following port
add restrictions do not apply. For this case, the following parameters will be reassigned to
the LAG port.
L2 Radio LAG is not available if a CorEvo card is in use.
1. Using the LAG Configuration Tool Settings tab, in the configured LAGs pane,
(L2 or L3).
click Create. See
Figure
The LAG Creation window displays. See
Administer L1/L2 radio and L2 Ethernet LAG
167.
Figure
Administer VLAN
168.
ports
313
Advertisement
Table of Contents
