Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 704
802.1Q VLAN management (default VLAN only)
2. Perform the following to create a VLAN:
i. Click on the ADD VLan button. The Create VLAN window opens.
ii. In the VLAN ID field, enter the VLAN ID (the configurable values must be in
the range 2 - 4080)
The VLAN IDs already defined to cross-connect internal flows (that is,
TDM2TDM, TDM2ETH) cannot be used.
iii. In the VLAN Name field, enter the VLAN Name: a text string of up to 32
characters.
There is no check on whether the name is in use for multiple VLANs.
iv. In the VLAN Ports field, select the ports members of this VLAN by putting a
check mark on the relevant check box.
Use the Provisioning Tool
935
Advertisement
Table of Contents
