Release 7.0.0 3DB 19286 ACAA Issue 01
Administer synchronization
32. Click Apply.
Figure 187
Synchronization - Master / Revertive
To provision Synchronization — Slave
1. Select the Synchronization tab.
2. Click the Synchronization Source in the resource tree area.
3. Click the Settings Tab in the resource detail area.
4. Select the Slave radio button in the Role partition.
5. Select a Primary Source radio button: Sync-In Port, Radio/MPT Port, or Eth
6. Which primary source was selected?
340
Synchronization Settings tab displays. See
Port.
a. If Sync-In Port, go to step 7.
b. If Radio/MPT Port, go to step 10.
WebEML User Manual
Figure
182.