Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
Administer external alarm points on an MSS-1 or
Enhanced Fan card
16.4 Procedure
1. Select action.
2. To
3. To
4. Open MSS External Input Point main view for MSS-1
5. To
6. Open MSS FANS Main View for MSS-8
7. Provision external alarm input
8. Select CPI#[11-14] in the resource tree area.
118
Open MSS External Input Point main view for
Open MSS FANS Main View for
Select MSS/HK in the resource tree area. This selection should also highlight
the Housekeeping inputs area in blue on the graphical representation of the
MSS-1 unit in the resource list area. The MSS External Input Point main view
opens, see
Figure
36.
Provision external alarm
Select Slot #9 MSS/FANS in the resource tree area. This selection should also
highlight the FAN card in blue on the graphical representation of the MSS-8 shelf
in the resource list area. The MSS A-FANS or E-FANS Main View opens. The
view is the same as shown in
From the MSS FANS main view or MSS External Input Point main view, click the
Settings tab. See
Figure
MSS-8, go to step 6.
input, go to step 7.
Figure
36.
36.
WebEML User Manual
MSS-1, go to step 4.
Advertisement
Table of Contents
