Figure 210 Ethernet To Ring Cross Connection - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
2. Select ETH port and drag to draw line to Ring port.
Figure 210 Ethernet to Ring Cross Connection
3. On the ETH-RING pop-up, select ERP Instance to be cross connected.
4. On the ETH-RING pop-up, select VLAN ID number in the Available VLANs field.
Note: Ranging is supported for ETH-RING cross-connection entry.
5. From the Service Profile drop-down menu, select TDM2ETH.
6. From the Clock Source drop-down menu, select ADAPTIVE or DIFFERENTIAL.
ports and other Ethernet and/or radio ports where connectivity is not desirable.
See Provision port segregation/connectivity
port segregation.
ETH-RING pop-up displays. See
Provision cross connections
for detailed steps to view/provision
Figure 210.
379