Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
2. Configure the MPT-HLC co-channel XPIC
3. Provision MPT-HLC 1+0 Horizontal XPIC Configuration:
4. Provision MPT-HLC 1+0 Vertical XPIC Configuration:
i. To
Provision the MPT-HLC Automatic Transmit Power Control
to step 43.
j. To
Provision the spare MPT-HLC
k. To
Provision the MPT-HLC radio protection
l. To
Provision the MPT-HLC link
m. To
Provision the MPT-HLC Synchronization Status
step 56.
n. To
Provision the MPT-HLC Point to Point Protocol
o. To
Provision the PKT throughput booster
p. To
Administer the MPT-HLC Alarm Profile
q. To
Provision the MPT-HLC radio channel
r. To
Administer the RX squelch
s. To
Configure the branching
Open the appropriate radio main view and select the Settings tab; see
Figure
614.
i. Provision 1+0 Horizontal radio channel. See step
to provision radio channel parameters.
ii. From the Option drop-down menu, choose gain configuration (Std/XPIC.
iii. Click Apply.
iv. Provision Horizontal radio channel XPIC Configuration Polarization to
Horizontal.
v. Click Apply.
i. Provision 1+0 Vertical radio channel. Provision the Vertical radio channel
using the following radio parameters identical to the values provisioned for
the horizontal radio channel (step
• Mode
• Reference Channel Spacing
• Modulation
• Shifter
• TX Freq
• Rx Freq
Configure radio parameters
ATPC, go to step 47.
scheme, go to step 48.
identifier, go to step 54.
settings, go to step 58.
setting, go to step 59.
settings, go to step 61.
encryption, go to step 65.
settings, go to step 68.
loss, go to step 71.
29
3
i).
(ATPC), go
Messaging, go to
or
32
for detailed steps
803
Advertisement
Table of Contents
