Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 617
MPT-HLC settings with ATPC
44. Provision MPT-HLC radio channel ATPC:
45. Select an action.
46. Provision the spare MPT-HLC ATPC
i. Select the ATPC Enabled check box.
ii. Enter the Min-Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold (-min / -max dBm).
iv. Click Apply.
a. To
Provision the spare MPT-HLC
b. To
Provision the MPT-HLC radio protection
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see
parameters.
Configure radio parameters
ATPC, go to step 47.
scheme, go to step 48.
Figure 617
for an example of the ATPC
819
Advertisement
Table of Contents
